First of all I want to show you the very nice case.
You see the two fans at the top (All fans got a blue led). Also at the front is another 12cm fan.
The box in the hdd slot was full of screws
.Here you see the BIG 22cm side fan. It produces an enormous air flow!
This is an hdd holder. Just put the dummyscrews at the screwholes of your hdd and then just slide it in
As always not screws, even for the extension slots. Just clip the metal sheet on and off!
Here I have installed most of the hardware, except my graphics card, hdd and dvd. As you see the Scythe Mugen 2B is very big!
This is the photo of a nearly closed case. As you see the Scythe-cooler nearly hits the 22cm fan
. You will not get the case closed!At the top you see the standard-screw of the 22cm side fan. I have searched for some bigger ones + some nuts. The aim is to put the fan outside.
This is the outer cover of the 22cm fan. I placed the nuts on the screwholes so it will stay outside. Then I put the side cover on top of it, after that also the 22cm fan and the air-filter. Take the screws to fix it!
As you see, looks also nice and is a nice work around for that problem!